Home » Drilling & Cutting » Router Bits » Edge Treatment & Detailing » Cove Bits » WP112810 Woodpecker Cove Bit 2 Flute 3/8" Radius 1/2" Shank

WP112810 Woodpecker Cove Bit 2 Flute 3/8" Radius 1/2" Shank

We will confirm stock on Dimar products prior to processing orders.

Brand: Dimar
Product Code: WP112810
Price: $22.64USD $19.25USD
Location Availability Min Qty
BC Warehouse Special Order - Delivery Varies 1
Dimar Canada To Be Confirmed 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

1 1/8" Dia, Carbide Tipped, Cove Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 2 1/2" Length

WoodPecker's Carbide Tipped Cove Bits are perfect for creating classic decorative indented edging and inverted radius to traditional pieces of furniture. They may be enhanced by changing the ball bearing guide to a smaller diameter bearing. You may match a specific Cove bit with its mating Rounding over a bit, to produce a Drop Leaf tables.

  • Two Flutes are ideal when fine finishing is a priority. 
  • Cuts most softwood and hardwood. 
  • Works on CNC, Hand-Held, Tabel router machines. 
Diameter (D) 1 1/8"
Number of Cutters 2
Shank (d) 1/2"
Cutting Length (B) 1/2"
Radius (R) 3/8"
Overall Length (L) 2 1/2"
Technology Carbide Tipped
Tools Hand Router, Table Router , CNC Machine
Material Soft Wood, Hard Wood
 
Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Continue
Tags: WP112810, Woodpecker, Cove, Bit, Flute, 3/8", Radius, 1/2", Shank, Bits, Dimar

TESTIMONIALS

  • Brent L
    Great blades,work great fast and friendly service. Didn't take them long to make and ship to Ontario ..
    19/04/2021
  • Terry Dawe
    Great Service which is always a plus !!! ..
    22/03/2018
  • Scott
    I needed custom sanding belts made to sharpen my jointer and planer blades. Ryan's advice was bang on! Super sharp blades in no time, with very little wear on the belts. Good pricing for a custom product. I would definitely use Online again!!!..
    17/07/2020
  • Gaetan
    J'ai acheté des scies à ruban sur mesures et ont été délivré à l'intérieur des dates prévues. Merci ..
    14/12/2022
  • Eric Gutierrez
    I was able to get help quickly before ordering...amazing customer service. Great products, shipped quickly and at a good price. Very satisfied Eric..
    22/06/2020
  • DANNY R.
    First time I purchased such an item for my 28114 Rockwell/Beaver 10" band saw. Wasn't to sure of all the terminology, so I called the experts at the Sydney, B.C. store. Very helpful staff, clued me in to all the acronyms, and then helped me with my order. Direct from the Peg. Was about a week to r..
    21/08/2019
  • Milton
    Ordered a Melamine Saw Blade 9" x 60 Tooth x 3.0mm Kerf x 5/8" Bore Ultima Series .Arrived in good time and was well packaged so as to arrive in great condition. But most of all it cut melamine like butter with no chipping. Great blade ..
    13/03/2024
  • Reuben
    Re-Mov is a remarkable product...quickly breaks the bond between the adhesive and the surface allowing removal without damage to the product or the surface....in my case I had attached a depth sounder to the inside hull of my boat and the sounder failed...I was able to remove it and replace it with ..
    21/11/2022
  • Pierre Dumaine
    Fast shipping, item as described . Will buy again..
    29/10/2018
  • Steve h
    Phenomenal service, fast shipping and a quality product! They even contacted me to double check that the blades I had ordered were suitable for my saw...
    04/02/2022
Leave a Review
Skookum Tools Ltd. © 2024