Home » Drilling & Cutting » Countersinks » Countersink Components for Wood » Counterbore » 3/4" Diameter x 3/16" Pilot Drill Hole Type X Counterbore

3/4" Diameter x 3/16" Pilot Drill Hole Type X Counterbore

Brand: W L Fuller
Product Code: X43L
Price: $34.09USD $28.99USD
Location Availability Min Qty
BC Warehouse 2 - 3 Weeks 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

WL Fuller Type X Counterbore

Designed to cut faster and deeper in hardwoods. Adaptable to high or low spindle speeds and hardened for long service.

Counterbores for the flat under the heads of nails, spikes, and bolts. Allowing them to be sunk far enough beneath the surface to allow for a wood plug to be used to cover the head. Can be set at any point on a twist drill and held fast with two hex-socket set screws.

  • Designed for clean cutting. 
  • Made of Carbon Steel and heat-treated for long tool life.
  • Stop Collars are not recommended for type “X” counterbores.

Made in USA

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Continue
Tags: 3/4", Diameter, 3/16", Pilot, Drill, Hole, Type, Counterbore, Fuller

TESTIMONIALS

  • Dan
    I purchased 4 bandsaw blades for my 93 1/2 in saw. The blades are good blades and they arrived quick so all good...
    18/03/2022
  • Randy Ulmer
    I ORDERED 3 DEGREES OF GRIT FOR MY ORBITAL AND THESE WERE PERFECT AND SEEM TO LAS A BIT LONGER ALSO..
    28/04/2021
  • Terry N
    My blade order arrived in good time. Can't give them a review yet, as I haven't had the chance to put them to the test, but I'm very happy with the service I received—especially with the phone call, the day after I made my online order, to check that I had ordered the correct size blades for my saw...
    26/06/2019
  • Zack Paquin
    First time customer and can not be more happy. The products I ordered came in 2 days and or great quality. ..
    29/05/2019
  • Island Enterprises
    The router bits I ordered were shipped fast and work great. I will be ordering again!..
    18/10/2023
  • Henry
    The catalog and product supply is great and the products come quickly. The prices are also superb. ..
    17/01/2021
  • Wade
    Placed my order a week after ordering the same think from KMS and recieved my shipment before my order from kms. ..
    02/02/2019
  • Chris. Rochon
    The blade appears to be of excellent quality. The fit is perfect with no alignment problem. I appreciated the attached detail directions for first operation since they are somewhat different than the expected “norm” procedures. It would be nice if a smaller delay in shipping was possible since there..
    17/03/2021
  • kconkin
    quick order turn around, high quality blades, definitely recommend. ..
    07/07/2022
  • Gord Bates
    I received the 3" x 20" sanding belts as ordered. Test drove one on my old Craftsman belt sander, and was more than satisfied. Previous belts from another supplier broke apart at the tape joint, probably from old stock. The Polish made belts are great, thanks...
    24/09/2023
Leave a Review
Skookum Tools Ltd. © 2024