Nonwoven Flap Roll 4-1/2" Diameter 4" Long with 3/4" Arbour Hole NFW600 (Very Fine) Klingspor 320255

Brand: Klingspor Abrasives
Product Code: 320255
Price: $62.80USD $43.96USD
Location Availability Min Qty
BC Warehouse Out Of Stock 1
Ontario Warehouse 11 1
Qty:  
   - OR -   

Discounted Shipping Calculated in the Checkout

NFW 600 S Satin Finishing Drums – for metals, stainless steel

 

NFW 600 S – satin finishing drums for metal and stainless steel

If you need a tool that is perfect for surface finishing on metal, you will not find a better solution than the Klingspor NFW 600 S satin finishing drum. It has been designed for applications on

  • stainless steel
  • metal

Marked by exceptional workmanship, this satin finishing drum turns the chore of creating a matt or satin finish into a pleasure. It operates with superior economy thanks to its particularly long service life. What is more, the tool produces a uniform surface finish from start to finish.

Attractive surfaces thanks to the satin finishing drum

The Klingspor NFW 600 S has been designed for creating both matt and satin finishes on stainless steel and other metals. Satin-finished surfaces still show a certain fine structure, which is also referred to as satin finishes. During matting, the workpiece receives a continuous diffuse reflection. The purpose of this surface refinement treatment is mostly aesthetic, which is why it is often applied to furniture or frames. This satin finishing drum provides a uniform transmission of the pressure that is exerted on the workpiece. Thus, a precise influence on the optical effect is possible.

Hardwearing non-woven flaps for continuous use

The uncompromising quality of the product is also evident in the workmanship applied to Klingspor’s NFW 600 S. The satin finishing drum is made up of a synthetic resin core to which the non-woven flaps are bonded in a radial arrangement. Aluminium oxide is used for the abrasive material. It has a high toughness and is therefore resistant to cracks or fractures. The associated economical wear behavior leads to high efficiency.

The right measure: Speed and diameter

A maximum speed of 19m/s allows the satin finishing drum to produce the best work result. The centrifugal force generated at this speed causes the flaps to stand upright. If the speed is too low, the flaps will bend too much. This will affect the surface quality and cause also premature wear of the drum. To allow the tool to work at peak efficiency, the user must ensure the drum diameter and running speed are correct. If the speed of the machine is adjustable, the speed will depend on the size of the selected drum. If the machine does not have speed control, the user can select a matching drum from Klingspor's extensive selection. The NFW 600 S complies with EU standard EN 13743 and meets the requirements set forth in the oSa guidelines as well.

Write a review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

TESTIMONIALS

  • Denis
    Fast shipping.....very good products !!!..
    20/07/2020
  • Steen Hjort
    Very well packed and fast delivery. The blades work great. What more could you ask for. ..
    02/08/2019
  • Mitch
    Received order faster than expected, even just after the rush of the holidays. Would order again!..
    17/01/2019
  • James Joyce
    2nd time I have used this company and once again, very pleased. It was easy to find what I was looking for and to make the order. The blades I ordered arrived in half the time I expected and beat their estimated delivery by 3 days.... ..
    08/08/2018
  • Maurice Smith
    Little long getting ,but kept in touch all in all very good ..
    29/01/2019
  • Ron Fuddy
    very quick shipping and the blades work great on my Bozeman saw ..I will order again ....
    15/09/2022
  • Neil Atkins
    Order arrived on time and metal band saw blade working great so far...
    28/10/2021
  • Sylvain
    Bon produit et livraison rapide !..
    11/02/2020
  • Chris Oosenbrug
    Ordered 3/32 x 5/8 x 4 in. jointer knives for a little 1964 General jointer I recently restored. I appreciate the prompt service and shipping. Thanks!..
    19/12/2023
  • Bryan T.
    Purchased three band saw blades and I am very happy with the product. Only issues is the delivery was to be 2-3 days. I paid the extra for fast delivery and did not get it for a week and a half from order date. Small issue as I can not get these blades local and the price is very reasonable. ..
    21/02/2019
Skookum Tools Ltd. © 2024