Special Offers

Reading Double Square, mm, 100mm Starrett 13 squares are very popular with machinists, toolmakers..

Steel Combination Square, Inch, 4" The Starrett 4" Combination Square with Square Head includes a..

Produced of high durability ABS plastic for extended case life, these tape measures offer overmold f..

3/4" Dia, Carbide Insert, Staggered Straight Bit, 2 Flutes, 1/2" Shank, 2 3/8" Length Dimar..

22mm Dia, Carbide Insert, Staggered Straight Bit, 2 Flutes, 1/2" Shank, 2 3/8" Length Dimar..

5/8" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 3/16" Length ..

Produced of high durability ABS plastic for extended case life, these tape measures offer overmold f..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 3/8" Shank, 2 3/4" Length ..

3/8" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/8" Length ..

3/8" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/4" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/8" Length ..

1/2" Dia, Carbide Tipped, Up-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/8" ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/4" Length ..

Produced of high impact resistant PC-ABS plastic for superior case life, these tape measures incorpo..

1/4" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/2" Length ..

Starrett 16 Foot Tape Measure Produced of high impact resistant PC-ABS plastic for superior case ..

1/4" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2" Length ..

1 1/8" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/2" Shank, 3 5/8" Le..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3 1/4" Length ..

5/8" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/2" Length..

1 1/4" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/2" Shank, 3 1/4" Le..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 2 3/4" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3 7/8" Length ..

3/4" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/2" Leng..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 4 1/4" Length ..

1/2" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2" Length ..

1/2" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2" Length ..

1/2" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/4" Leng..

26mm Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 3/8" Shank, 2 3/4" Leng..

..

3/4" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/2" Shank, 3 5/8" Leng..

3/4" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3" Length ..

1/2" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/2" Leng..

..

3/4" Dia, Carbide Tipped, Up-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 4" Leng..

3/4" Dia, Carbide Tipped, Up-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 4 5/8" ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Double Ball Bearings, 2 Flutes, 1/2" Shank, 4 1/16" ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Double Ball Bearings, 2 Flutes, 1/2" Shank, 4 1/2" L..

5/8" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 3/1..

3/4" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 3/8..

1/2" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3" Le..

3/4" Dia, Inlay Trimming Bit with Ball Bearing, 2 Flute, 0 Degree Angle, 1/2" Shank, 3" Length ..

3/4" Dia, Carbide tipped, Inlay Trimming Bit with Ball Bearing, 5 Degree Angle, 1/2" Shank, 3" Len..

1/2" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/8..

1/2" Dia, Carbide Tipped, Template Bit with Centre Ball Bearing, 2 Flutes, 1/4" Shank, 2 3/4" Leng..

3/4" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 7/8..

3/4" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 4" Le..

3/4" Dia, Carbide Tipped, Down-Shear Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 4 1/2..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 3 Flutes, 1/4" Shank, 2 5/8" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 3 Flutes, 1/4" Shank, 2 1/4" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 3 Flutes, 1/2" Shank, 3 1/4" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 3 Flutes, 1/2" Shank, 2 3/4" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 3 Flutes, 1/2" Shank, 3 7/8" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Double Ball Bearings, 3 Flutes, 1/2" Shank, 4 1/16" ..

1/2" Dia, Carbide Tipped, Flush Trim V Groove Bit, 2 Flutes, 1/4" Shank, 2 5/8" Length This..

1/2" Dia, Carbide Tipped, Flush Trim V Groove Bit, 2 Flutes, 1/2" Shank, 3 1/4" Length This..

3/8" Dia, Carbide Tipped, Bevel and Flush Trim Bit, 2 Flutes, 1/4" Shank, 1 5/8" Length Thi..

1/2" Dia, Carbide Tipped, Bevel and Flush Trim Bit, 2 Flutes, 1/4" Shank, 1 5/8" Length Thi..

1/2" Dia, Carbide Tipped, Bevel and Flush Trim Bit, 2 Flutes, 1/4" Shank, 1 5/8" Length Thi..

1/2" Dia, Carbide Tipped, Bevel and Flush Trim Bit, 2 Flutes, 1/4" Shank, 1 5/8" Length Thi..

1/2" Dia, Carbide Tipped, Bevel and Flush Trim Bit, 1 Flutes, 1/4" Shank, 1 5/8" Length Thi..

1/4" Dia, Solid Carbide, Flush Trimming Bit, 1/4" Cutting Length, 1/4" Shank, 1 1/2" Length ..

1/4" Dia, Solid Carbide, Flush Trimming Bit, 1/4" Cutting Length, 1/4" Shank, 1 1/2" Length ..

1/4" Dia, Solid Carbide, Flush Trim Bit with Boring Point, 1/4" Shank, 1 1/2" Length Dimar'..

1/4" Dia, Solid Carbide, Flush Trim Bit with Boring Point, 1/4" Shank, 1 1/2" Length   ..

1/4" Dia, Solid Carbide, Flush Trimming Bit, 1/4" Cutting Length, 1/4" Shank, 2" Length ..

1/2" Dia, X-File Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length Dia..

1/2" Dia, X-File Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 2 1/8" Length WoodPecker's Ca..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length ..

3/8" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3 5/8" Length ..

1/2" Dia, Carbide Tipped, Flush Trim Bit with Ball Bearing, 2 Flutes, 1/2" Shank, 3 5/8" Length ..

Fits hole saws from 32-210mm (1.1./4 - 8.9/32") diameter  Arbor suitable for use with SH, DH, C..

Fits hole saws from 32-210mm (1.1./4 - 8.9/32") diameter  Arbor suitable for use with SH, DH, C..

 KA19 Hole Saw Enlargement Arbor Replacing the pilot drill, the KA19 allows diameters to be..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Starcke Ceramic Sanding Belt To be used with relatively high pressure especially where good stock..

Starcke Ceramic Sanding Belt To be used with relatively high pressure especially where good stock..

Starcke Ceramic Sanding Belt To be used with relatively high pressure especially where good stock..

Material: Aluminium, Wood, Steel Application examples: • The extremely robust polyester backing ..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Aluminum Oxide Belts with Cloth Backing – for stainless steel, wood, steel, NF metals   For si..

Zirconia Sanding Belts – for stainless steel, steel, metals The universal product for processing ..

Zirconia Sanding Belts – for stainless steel, steel, metals The universal product for processing ..

Zirconia Sanding Belts – for stainless steel, steel, metals The universal product for processing ..

Aluminum Oxide Belts with Cloth Backing – for metals, NF metals, stainless steel, steel   A pr..

Aluminum Oxide Belts with Cloth Backing – for metals, NF metals, stainless steel, steel   A pr..

Surface Conditioning Belts – for stainless steel, aluminum and other non-ferrous metals These bel..