Special Offers

Universal scoring saws used on double end tenoning machines for scoring laminates and veneers to pre..

Universal scoring saws used on double end tenoning machines for scoring laminates and veneers to pre..

Universal scoring saws used on double end tenoning machines for scoring laminates and veneers to pre..

Universal scoring saws used on double end tenoning machines for scoring laminates and veneers to pre..

The UNSCREW-UMS are designed to back out broken screws and remove other fasteners with minimal damag..

Upholstery nozzle With brush strips   Fits: Turbo I (Turbo I), Turbo II (Turbo II), Turbo II..

1 17/32" Dia, Carbide Tipped, Upstand/ Corner Cove Bits, 2 Flutes, 1/2" Shank, 3 1/16" Length ..

Five-Position Safety Knife, 18 mm, Silver, Rubber Handle Symmetrically shaped, fiberglass-rein..

For use with Aurora Tools vacuums..

Durable structural foam construction will not dent, rust or bend Non-marking 5" casters Based..

80,000 PSI Industrial grade ductile iron Built in pipe jaws hold round objects Hardened anvil stri..

Size -- VFlute Length -- 1-7/8Flute Type -- StandardOverall Length -- 3-1/4Point Sty..

8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

10mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

10mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank ..

5mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

5mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank D..

Proline Carbide Thru-hole Drill For use on CNC drill banks and portable machines. Proline thru-ho..

5mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

5mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank D..

6mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

6mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, RH, 10mm Shank ..

6mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

6mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank D..

7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank D..

7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank D..

8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank D..

8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank ..

8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, RH, 10mm Shank, 70mm Length Di..

10mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank ..

V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..

V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..

V-top saws for mitre cuts and optimizer saws. Extremely sharp tops provide exceptional cross cuts..

V-top saws for mitre cuts and optimizer saws. Extremely sharp tops provide exceptional cross cuts..

V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..

V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..

V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..

V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..

Grinding belts Very flexible, ideal for sanding curved tube 13/16 x 32-1/16 in   Fits: RS 1..

Vacuum plate For non-magnetic materials and textured surfaces, such as checkered plate. This requ..

Fein 6″ Sanding Pad – Hook and Loop Fein 31426030005 6″ Sanding Pad – Hook and Loop: Dia..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..

Custom made 3x984 rolls. Lead time is 3 weeks + shipping.   ..

Custom made 3x984 rolls. Lead time is 3 weeks + shipping.   ..

Custom made 3x984 rolls. Lead time is 3 weeks + shipping.   ..

Custom made 3x984 rolls. Lead time is 3 weeks + shipping.   ..

Custom made 3x984 rolls. Lead time is 3 weeks + shipping.   ..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..

convenient 4-1/2" width for palm & half sheet sanders. Also great for hand/block sanding! semi-op..

semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..

FEIN VersaMAG Welding Plate 250mm x 250mm (10” x 10”) square plate 16mm diameter holes Pla..

A Powerful, Portable Vise – The new FEIN VersaMAG system Flexible large 4.25” jaw capacity F..

FEIN VersaMAG Oversize Jaws 60mm Jaws Only compatible with Fein VersaMAG system Order n..

Commonly used clamps in manufacturing Perfect for holding work pieces in place Durable steel const..

Commonly used clamps in manufacturing Perfect for holding work pieces in place Durable steel const..

Commonly used clamps in manufacturing Perfect for holding work pieces in place Durable steel const..

Anti-vibration handle M 14, vibration absorbing, to reduce the vibrations during longer jobs.   ..

Prism vise|9 07 01 002 01 0 ..

Self-Centering VIX Bits accurately center and drill holes For hinges, striker plates, door butts,..

Self-Centering VIX Bits accurately center and drill holes For hinges, striker plates, door butts,..

Self-Centering VIX Bits accurately center and drill holes For hinges, striker plates, door butts,..

Self-Centering VIX Bits accurately center and drill holes For hinges, striker plates, door butts,..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..

Replacement 4” SH-65 Vonnegut Brush Used inbetween loadings to make your full Vonnegut kit ..

Size -- WFlute Length -- 1-7/8Flute Type -- StandardOverall Length -- 3-1/4Point Sty..

1 1/4" Dia, Carbide Tipped, Bevel Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 1 7/8" Length ..

5/8" Dia, Carbide Tipped, Bevel Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length ..

1/2" Dia, Carbide Tipped, Dovetail Bit, 2 Flutes, 1/4" Shank, 1 3/4" Length WoodPecker's Ca..

1/2" Dia, Carbide Tipped, V Groove Bit, 2 Flutes, 1/4" Shank, 1 3/4" Length WoodPecker's Ca..

3/8" Dia, Carbide Tipped, V Groove Bit, 2 Flutes, 1/4" Shank, 1 1/2" Length WoodPecker's Ca..

1/2" Dia, Carbide Tipped, Round Nose Bit, 2 Flutes, 1/4" Shank, 1 1/2" Length WoodPecker's ..

1/4" Dia, Carbide Tipped, Round Nose Bit, 2 Flutes, 1/4" Shank, 1 1/2" Length WoodPecker's ..

7/8" Dia, Carbide Tipped, Cove Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length W..

1 1/8" Dia, Carbide Tipped, Cove Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/16" Length ..

1" Dia, Carbide Tipped, Roman Ogee Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/32" Length, WP..

1 1/8" Dia, Carbide Tipped, Rabbeting Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length ..

1/2" Dia, Carbide Tipped, Classical Plunge Bit, 2 Flutes, 1/4" Shank, 1 21/32" Length WoodP..

3/16" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 1 7/8" Length WoodPecker's ..

1/4" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length WoodPecker's Doubl..

5/16" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length WoodPecker's Doub..