Special Offers

Coating -- Corner Radius -- Diameter -- 7/16Flute Length -- 7/8Flute Type -- 30 ..

Coating -- Aluminum Titanium NitrideCorner Radius -- Diameter -- 7/16Flute Length -- ..

Coating -- Corner Radius -- Diameter -- 7/16Flute Length -- 5/8Flute Type -- 30 ..

Coating -- Aluminum Titanium NitrideCorner Radius -- Diameter -- 7/16Flute Length -- ..

Coating -- Corner Radius -- Diameter -- 7/16Flute Length -- 1"Flute Type -- 30 D..

Coating -- Aluminum Titanium NitrideCorner Radius -- .025Diameter -- 7/16Flute Length ..

Coating -- Aluminum Titanium NitrideCorner Radius -- .020Diameter -- 7/16Flute Length ..

Coating -- Aluminum Titanium NitrideCorner Radius -- Diameter -- 7/16Flute Length -- ..

Coating -- Aluminum Titanium NitrideCorner Radius -- .015--.020Diameter -- 7/16Flute Len..

Size -- 7/16Flute Length -- 3-5/8Flute Type -- StandardOverall Length -- 6-7/32Point..

Size -- 7/16Flute Length -- 94.00mmFlute Type -- Wide Land ParabolicOverall Length -- ..

Size -- 7/16Flute Length -- 94.00mmFlute Type -- Wide Land ParabolicOverall Length -- ..

Size -- 7/16Flute Length -- 71mmFlute Type -- Coolant ThroughOverall Length -- 118mm..

Size -- 7/16Flute Length -- 128.00mmFlute Type -- Wide Land ParabolicOverall Length --..

Size -- 7/16Flute Length -- 128.00mmFlute Type -- Wide Land ParabolicOverall Length --..

Size -- 7/16Flute Length -- 128.00mmFlute Type -- Wide Land ParabolicOverall Length --..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 12"Point S..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 6"Point St..

Cutting Diameter -- 0.6910Flute Length -- 1-1/4Number of Flutes -- 4Overall Length -- ..

Cutting Diameter -- 0.6610Flute Length -- 1-1/4Number of Flutes -- 4Overall Length -- ..

Cutting Diameter -- 0.676Flute Length -- 1-1/4Number of Flutes -- 4Overall Length -- ..

Number of Flutes -- 3Overall Length -- 4-1/16Pilot Hole Size -- 5/32Pilot Range -- 3..

Size -- 7/16Flute Length -- Flute Type -- Overall Length -- 5-1/2Point Style -- ..

Size -- 7/16Flute Length -- 7-1/2Flute Type -- StandardOverall Length -- 10"Point St..

Size -- 7/16Flute Length -- 9"Flute Type -- StandardOverall Length -- 12"Point Style..

Size -- 7/16Flute Length -- 14"Flute Type -- StandardOverall Length -- 18"Point Styl..

Size -- 7/16Flute Length -- 5-1/2Flute Type -- StandardOverall Length -- 8"Point Sty..

Size -- 7/16Flute Length -- Flute Type -- Overall Length -- 3-1/2Point Style -- ..

Twist Drill Overall Length: 3-3/4" Drill Bit Point Angle: 135 Degrees Drill Bit Finish: Un..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 5-1/2Point..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 5-1/2Point..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- Low HelixOverall Length -- 5-1/2Poin..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- ParabolicOverall Length -- 5-1/2Poin..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- ParabolicOverall Length -- 5-1/2Poin..

Size -- 7/16Flute Length -- 2-1/2Flute Type -- High HelixOverall Length -- 4"Point S..

Size -- 7/16Flute Length -- 4"Flute Type -- High HelixOverall Length -- 6"Point Styl..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StandardOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 1-3/16Flute Type -- StandardOverall Length -- 2-1/2Point..

Size -- 7/16Flute Length -- Flute Type -- NoneOverall Length -- 4-1/2Point Style -..

Class: Tool BitsList No. 4226SMaterial: Cobalt M42Overall Length: 3-1/2Type: Square..

Size -- 7/16Flute Length -- 2-7/8Flute Type -- StandardOverall Length -- 4-1/2Point ..

Size -- 7/16Flute Length -- 2-7/8Flute Type -- StandardOverall Length -- 5-1/2Point ..

Size -- 7/16Flute Length -- 3"Flute Type -- StraightOverall Length -- 5-1/2Point Sty..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StraightOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 2-1/16Flute Type -- StraightOverall Length -- 3-7/16Poin..

Size -- 7/16Flute Length -- 4-5/8Flute Type -- StandardOverall Length -- 7-1/4Point ..

Size -- 7/16Flute Length -- 4-3/8Flute Type -- StandardOverall Length -- 7-1/4Point ..

Size -- 7/16Flute Length -- 5-11/16Flute Type -- StandardOverall Length -- 5-1/4Poin..

Size -- 7/16Flute Length -- 4-5/8Flute Type -- High HelixOverall Length -- 7-1/4Poin..

Size -- 7/16Flute Length -- 4-5/8Flute Type -- StandardOverall Length -- 7-1/4Point ..

Size -- 7/16Flute Length -- 5-11/16Flute Type -- ParabolicOverall Length -- 7-1/4Poi..

Size -- 7/16Flute Length -- 5-11/16Flute Type -- ParabolicOverall Length -- 7-1/4Poi..

#13 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#14 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#15 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#16 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#17 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#18 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#19 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#20 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#21 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#22 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#23 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#24 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#25 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#26 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#27 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#28 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#29 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#30 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

11/64" Steel Drill Stop  Held solidly in place with two set screws to give positive control ove..

3/16" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

4mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

5/32" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

9/64" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

7/16” Carbide Tipped Masonry Drill Heavy-Duty masonry bit. The wide flutes improve dust removal w..

Procut jobber drill 7/16 ..

Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 5-1/2Point..

Single Flute Upcut Spiral Hard Plastic & Aluminum Single flute Upcut tool good for routing hard p..

2 Flute Downcut Hard Plastic & Aluminum Bit Good for routing hard plastics and aluminum. End mill..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Straight Wood & Plastic Bit General purpose, good for routing solid wood and hard plastic..

Upcut Bit for Aluminum & Hard Plastics Excellent for routing in hard plastics and aluminum. ..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

High Speed Steel Countersink for Metal Heat-treated for long tool life. Designed to only sink ..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

K Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws ..

K Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws ..

KS Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws..

KS Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..