7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank
..
$40.70USD $36.63USD
7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank
D..
$40.70USD $36.63USD
7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank
..
$59.89USD $53.90USD
7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank
..
$59.89USD $53.90USD
7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank
..
$40.70USD $36.63USD
7mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank
D..
$40.70USD $36.63USD
8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank
D..
$34.74USD $31.27USD
8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edges, 1 Flute Body, LH, 10mm Shank
..
$38.48USD $34.63USD
8mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, RH, 10mm Shank, 70mm Length
Di..
$38.48USD $34.63USD
10mm Dia, Carbide Tipped, Through Hole Dowel Drill, 2 Cutting Edge, 1 Flute Body, RH, 10mm Shank
..
$36.37USD $32.73USD
V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..
$114.76USD $103.28USD
V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..
$184.68USD $166.21USD
V-top saws for mitre cuts and optimizer saws.
Extremely sharp tops provide exceptional cross cuts..
$203.74USD $183.37USD
V-top saws for mitre cuts and optimizer saws.
Extremely sharp tops provide exceptional cross cuts..
$249.11USD $224.20USD
V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..
$322.30USD $290.07USD
V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..
$273.57USD $246.21USD
V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..
$400.76USD $360.69USD
V-top saws for mitre cuts and optimizer saws extremely sharp tops provide exceptional cross cuts on ..
$457.02USD $411.32USD
Grinding belts
Very flexible, ideal for sanding curved tube
13/16 x 32-1/16 in
Fits:
RS 1..
$77.67USD $69.90USD
Vacuum plate
For non-magnetic materials and textured surfaces, such as checkered plate. This requ..
$1,540.67USD $1,386.60USD
Fein 6″ Sanding Pad – Hook and Loop
Fein 31426030005 6″ Sanding Pad – Hook and Loop:
Dia..
$43.62USD $39.26USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$31.73USD $23.80USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..
$31.73USD $23.80USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..
$31.73USD $23.80USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..
$31.73USD $23.80USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$32.68USD $24.51USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..
$31.73USD $23.80USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$39.62USD $29.72USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calib..
$31.73USD $23.80USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$34.87USD $26.15USD
Custom made 3x984 rolls. Lead time is 3 weeks + shipping.
..
$72.72USD $54.54USD
Custom made 3x984 rolls. Lead time is 3 weeks + shipping.
..
$72.72USD $54.54USD
Custom made 3x984 rolls. Lead time is 3 weeks + shipping.
..
$72.72USD $54.54USD
Custom made 3x984 rolls. Lead time is 3 weeks + shipping.
..
$66.10USD $49.58USD
Custom made 3x984 rolls. Lead time is 3 weeks + shipping.
..
$72.72USD $54.54USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$119.89USD $89.92USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$132.00USD $99.00USD
convenient 4-1/2" width for palm & half sheet sanders. Also great for hand/block sanding!
semi-op..
$260.34USD $195.25USD
semi-open coated aluminium oxide on b/c weight paper backing with velcro (hook & loop) for calibrati..
$240.75USD $180.57USD
FEIN VersaMAG Welding Plate
250mm x 250mm (10” x 10”) square plate
16mm diameter holes
Pla..
$317.07USD $285.36USD
A Powerful, Portable Vise – The new FEIN VersaMAG system
Flexible large 4.25” jaw capacity
F..
$795.87USD $716.28USD
FEIN VersaMAG Oversize Jaws
60mm Jaws
Only compatible with Fein VersaMAG system
Order n..
$73.42USD $66.07USD
Anti-vibration handle
M 14, vibration absorbing, to reduce the vibrations during longer jobs.
..
$93.63USD $84.27USD
Prism vise|9 07 01 002 01 0
..
$256.42USD $230.78USD
Self-Centering VIX Bits accurately center and drill holes
For hinges, striker plates, door butts,..
$54.39USD $43.51USD
Self-Centering VIX Bits accurately center and drill holes
For hinges, striker plates, door butts,..
$22.42USD $17.94USD
Self-Centering VIX Bits accurately center and drill holes
For hinges, striker plates, door butts,..
$22.42USD $17.94USD
Self-Centering VIX Bits accurately center and drill holes
For hinges, striker plates, door butts,..
$22.42USD $17.94USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$29.03USD $26.13USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$29.03USD $26.13USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$29.03USD $26.13USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$29.03USD $26.13USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$18.60USD $16.74USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$29.03USD $26.13USD
Four strips of silicon carbide cloth material stagger slashed at 1/4" intervals and cut into 19" len..
$36.71USD $33.04USD
Replacement 4” SH-65 Vonnegut Brush
Used inbetween loadings to make your full Vonnegut kit
..
$15.67USD $14.11USD
1 1/4" Dia, Carbide Tipped, Bevel Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 1 7/8" Length
..
$18.14USD $16.32USD
5/8" Dia, Carbide Tipped, Bevel Trim Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length
..
$12.37USD $11.13USD
1/2" Dia, Carbide Tipped, Dovetail Bit, 2 Flutes, 1/4" Shank, 1 3/4" Length
WoodPecker's Ca..
$8.06USD $7.26USD
1/2" Dia, Carbide Tipped, V Groove Bit, 2 Flutes, 1/4" Shank, 1 3/4" Length
WoodPecker's Ca..
$9.21USD $8.29USD
3/8" Dia, Carbide Tipped, V Groove Bit, 2 Flutes, 1/4" Shank, 1 1/2" Length
WoodPecker's Ca..
$9.20USD $8.28USD
1/2" Dia, Carbide Tipped, Round Nose Bit, 2 Flutes, 1/4" Shank, 1 1/2" Length
WoodPecker's ..
$8.42USD $7.58USD
1/4" Dia, Carbide Tipped, Round Nose Bit, 2 Flutes, 1/4" Shank, 1 1/2" Length
WoodPecker's ..
$7.04USD $6.33USD
7/8" Dia, Carbide Tipped, Cove Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length
W..
$13.99USD $12.59USD
1 1/8" Dia, Carbide Tipped, Cove Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/16" Length
..
$20.03USD $18.03USD
1" Dia, Carbide Tipped, Roman Ogee Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/32" Length, WP..
$22.80USD $20.52USD
1 1/8" Dia, Carbide Tipped, Rabbeting Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length
..
$16.83USD $15.15USD
1/2" Dia, Carbide Tipped, Classical Plunge Bit, 2 Flutes, 1/4" Shank, 1 21/32" Length
WoodP..
$12.65USD $11.39USD
3/16" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 1 7/8" Length
WoodPecker's ..
$13.71USD $12.34USD
1/4" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doubl..
$6.73USD $6.06USD
5/16" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doub..
$7.47USD $6.73USD
3/8" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doubl..
$7.83USD $7.05USD
1/2" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doubl..
$8.42USD $7.58USD
9/16" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doub..
$9.80USD $8.82USD
5/8" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doubl..
$11.10USD $9.99USD
3/4" Dia, Carbide Tipped, Straight Bits, 2 Flutes, 1/4" Shank, 2" Length
WoodPecker's Doubl..
$13.28USD $11.95USD
1 7/8" Dia, Carbide Tipped, Slotting Cutter, 3 Flute, 5/16" Bore
WoodPecker's Carbide Tippe..
$16.44USD $14.80USD
1 7/8" Dia, Carbide Tipped, Slotting Cutter, 3 Flute, 5/16" Bore
WoodPecker's Carbide Tippe..
$20.35USD $18.31USD
1 5/8" Dia, Carbide Tipped, Slotting Cutter, 4 Flute, 1/4" Kerf, 5/16" Bore
Dia..
$23.99USD $21.58USD
3/4" Dia, Carbide Tipped, Rounding Over Bit, 2 Flutes, 1/4" Shank, 2 1/8" Length
WoodPecker..
$11.96USD $10.77USD
3/4" Dia, Carbide Tipped, Beading Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/8" Length
..
$12.65USD $11.39USD
1" Dia, Carbide Tipped, Rounding Over Bit, 2 Flutes, 1/4" Shank, 2 3/16" Length
WoodPecker'..
$15.61USD $14.05USD
1 1/8" Dia, Carbide Tipped, Rounding Over Bit, 2 Flutes, 1/4" Shank, 2 1/4" Length
WoodPeck..
$16.83USD $15.15USD
1 1/8" Dia, Carbide Tipped, Beading Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 1/4" Length
..
$16.83USD $15.15USD
1" Dia, Carbide Tipped, Beading Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 3/16" Length
..
$15.61USD $14.05USD
1 1/4" Dia, Carbide Tipped, Rounding Over Bit, 2 Flutes, 1/4" Shank, 2 5/16" Length
WoodPec..
$21.39USD $19.26USD
1 1/4" Dia, Carbide Tipped, Beading Bit with Ball Bearing, 2 Flutes, 1/4" Shank, 2 5/16" Length
..
$20.03USD $18.03USD
1 1/2" Dia, Carbide Tipped, Rounding Over Bit, 2 Flutes, 1/4" Shank, 2 7/16" Length
WoodPec..
$23.95USD $21.55USD
Waffle sponge
Extremely fine and soft polishing sponge for removal of holograms on dark paints. 6..
$43.62USD $39.26USD
For quenching sparks, metal cover for hose connection, plastic, side handles, capacity approx. 5.3 g..
$326.65USD $293.98USD
Wedge for Multi Face Profile Cutter, 28mm Length
Wedge for Multi-Face Profile Cutter
28m..
$15.48USD $13.93USD
11.42mm Width, Wedge for Rebating Cutters, 38mm Length
Width (H)
11.42mm
..
$26.83USD $24.15USD
11.60mm Width, Wedge for Rebating Cutters, 46mm Length
Overall Length (L)
4..
$26.83USD $24.15USD
49mm Length, Wedge, 11.90mm Width
..
$19.42USD $17.47USD
Wedge, 6.5mm Length, 8mm Width
..
$21.42USD $19.28USD
25.75mm Width, Wedge for 7760087 Cutter, 38mm Length
These flat spacers are used for router b..
$22.44USD $20.19USD
Wedge for K120 Cutters
..
$75.71USD $68.13USD
Wedge for the Multi Profile Cutter
..
$17.70USD $15.93USD
