Special Offers

#40 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#41 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#42 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#43 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#44 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#45 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#46 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#47 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#48 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#49 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#50 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#51 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

#52 Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

1/16" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

1/8" Steel Drill Stop  Held solidly in place with two set screws to give positive control over ..

2mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

3/32" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

3mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

5/64" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

7/64" Steel Drill Stop  Held solidly in place with two set screws to give positive control over..

3/8” Stubby Length Taper Drill Bit Used to cut wood and plastics in one operation for the thread ..

3/8” HSS End Mill Cutting Diameter (DC) 3/8″ Flute Count (NOF) 4 ..

3/8” Carbide Tipped Masonry Drill Heavy-Duty masonry bit. The wide flutes improve dust removal wh..

3/8” Standard Length “Fast Spiral” Taper Point Drill Cuts faster and clears chips better than the..

3/8” Standard Length Taper Drill Bit Used to cut wood and plastics in one operation for the threa..

3/8” Extra Long “Fast Spiral” Taper Point Drill Cuts faster and clears chips better than the gene..

3/8” Extra Length Taper Drill Bit Used to cut wood and plastics in one operation for the thread a..

3/8” x 8” Long Taper Drill Bit The longest available taper drills for cutting wood and plastics. ..

Procut jobber drill 3/8 ..

2 Flute “O” Style Downcut Slow Spiral Bit Excellent for routing both soft and hard plastics. ..

Downcut Spiral Ultimax..

2 Flute “O” Style Straight Cut Bit Double wing O Flute designed for routing soft plastics ..

2 Flute “O” Flute Upcut Slow Spiral Excellent for routing both soft and hard plastics. ..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

Upcut Spiral Ultimax..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

Solid Carbide Router Upcut..

2 Flute Straight Wood & Plastic Bit General purpose, good for routing solid wood and hard plastic..

Downcut Spiral Ultimax..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Upcut Ballnose Bit General purpose for solid wood and wood composites. Upcut spiral gives..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Straight Wood & Plastic Bit General purpose, good for routing solid wood and hard plastic..

2 Flute Upcut High Impact Bit General purpose router for solid wood, wood composites and some pla..

Upcut Spiral Ultimax..

3 Flute Upcut Spiral Mill End Bit Good for routing hard plastics and finish passes on solid woods..

Composite Router Tool Unique flute geometry specifically designed for routing reinforced plastic ..

Composite Router Tool Unique flute geometry specifically designed for routing reinforced plastic ..

1 Flute Compression Spiral For routing laminated or veneered wood and wood composites when top an..

Downcut Spiral Single Flute..

Single Flute Downcut “O” Style Hard Plastic Designed for routing hard plastics. Downcut design to..

Single Flute Downcut “O” Style Soft Plastic Designed for routing soft plastics. Downcut design to..

Single Flute Upcut “O” Style Aluminum Designed for routing aluminum sheet and solid material on C..

Single Flute Upcut “O” Style Hard Plastic Designed for routing hard plastics. Upcut design gives ..

Single Flute Upcut “O” Style Soft Plastic Designed for routing soft plastics. Upcut design gives ..

Single Flute Upcut Soft Plastics Designed for routing soft plastic. ..

V-Flute Straight Cut..

2 Flute Compression Chipbreaker For routing laminated or veneered wood and wood composites when t..

2 Flute Downcut Chipbreaker Finisher General purpose for solid wood and wood composites. Downcut ..

2 Flute Ultimax Mortise Compression For routing laminated or veneered wood and wood composites wh..

2 Flute Mortise Compression For routing laminated or veneered wood and wood composites when top a..

2 Flute Mortise Compression For routing laminated or veneered wood and wood composites when top a..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Upcut Ballnose Bit General purpose for solid wood and wood composites. Upcut spiral gives..

Solid Carbide Router Upcut..

2 Flute Straight Wood & Plastic Bit General purpose, good for routing solid wood and hard plastic..

2 Flute Upcut Chipbreaker Finisher General purpose for solid wood and wood composites. Upcut spir..

2 Flute Upcut High Impact Bit General purpose router for solid wood, wood composites and some pla..

3 Flute Mortise Compression For routing laminated or veneered wood and wood composites when top a..

3 Flute Ultimax Compression For routing laminated or veneered wood and wood composites when top a..

3 Flute Downcut Chipbreaker Finisher General purpose for solid wood and wood composites. Downcut ..

Downcut Chipbreaker Finisher..

3 Flute Downcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood g..

3 Flute Downcut Low Helix Finisher For routing plastics and composites, as well as finish passes ..

3 Flute Downcut Low Helix Ripper Bit Serrated tooth design to eliminate tear out in difficult woo..

3 Flute Downcut Low Helix Ripper Bit Serrated tooth design to eliminate tear out in difficult woo..

2 Flute Upcut Chipbreaker Finisher General purpose for solid wood and wood composites. Upcut spir..

3 Flute Upcut Chipbreaker Finisher General purpose for solid wood and wood composites. Upcut spir..

3 Flute Upcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood gra..

3 Flute Upcut Low Helix Finisher For routing plastics and composites as well as finish passes on ..

3 Flute Upcut Low Helix Ripper Serrated tooth design to eliminate tear out in difficult wood grai..

4 Flute Upcut Fiberglass Router Bit 4 wing upcut router good for routing fiberglass ..

O-Flute Straight Cut Plastics..

2 Flute Straight General Purpose Bit Suitable for routing solid wood, MDF and some plastics ..

Compression Spiral..

Upcut Lock Mortise Tool..

Solid O-Flute Router..

2 Flute Beading Tools For beading profiles in MDF, solid wood and plastics. 10º flares provide li..

Carbide Countersink for Abrasive Material Manufactured from Ferro-Tic® machinable carbide and har..

High Speed Steel Countersink for Metal Heat-treated for long tool life. Designed to only sink ..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

Four Flute Countersink with 1/4” Shank for Smaller Drills The type “J” countersink has a 1/4” sha..

K Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws ..

K Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws ..

KS Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws..

KS Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws..