Special Offers

Number of Flutes -- 6Size -- 3/4Included Angle -- 100 DegreeMaterial -- CarbideCoating -- Finish -- ..

Number of Flutes -- 6Size -- 3/4Included Angle -- 120 DegreeMaterial -- CarbideCoating -- Finish -- ..

Number of Flutes -- 6Size -- 3/4Included Angle -- 60 DegreeMaterial -- CarbideCoating -- Finish -- B..

Number of Flutes -- 6Size -- 3/4Included Angle -- 60 DegreeMaterial -- Cobalt M42Coating -- Titanium..

Number of Flutes -- 6Size -- 3/4Included Angle -- 82 DegreeMaterial -- CarbideCoating -- Finish -- B..

Number of Flutes -- 6Size -- 3/4Included Angle -- 82 DegreeMaterial -- Cobalt M42Coating -- Titanium..

Number of Flutes -- 6Size -- 3/4Included Angle -- 90 DegreeMaterial -- CarbideCoating -- Finish -- B..

Number of Flutes -- 6Size -- 3/4Included Angle -- 90 DegreeMaterial -- Cobalt M42Coating -- Titanium..

Number of Flutes -- 3Overall Length -- 5-3/8Pilot Hole Size -- 1/4Pilot Range -- 5/1..

Drill Rod W-1 Water Hardened (W-1) Water hardened drill rod is the most popular, versatile, and..

Number of Flutes -- 6Size -- 3/4Included Angle -- 60 DegreeMaterial -- CarbideCoating -- Finish -- B..

Number of Flutes -- 6Size -- 3/4Included Angle -- 82 DegreeMaterial -- CarbideCoating -- Finish -- B..

Number of Flutes -- 6Size -- 3/4Included Angle -- 90 DegreeMaterial -- CarbideCoating -- Finish -- B..

Size -- 3/4Flute Length -- 9"Flute Type -- StandardOverall Length -- 12"Point Style ..

Size -- 3/4Flute Length -- 4"Flute Type -- High HelixOverall Length -- 6"Point Style..

Size -- 3/4Flute Length -- 4"Flute Type -- StandardOverall Length -- 6"Point Style ..

Size -- 3/4Flute Length -- 3-1/8Flute Type -- StandardOverall Length -- 4-5/8Point S..

Size -- 3/4Flute Length -- 3-1/8Flute Type -- StandardOverall Length -- 5"Point Styl..

Class: Tool BitsList No. 4226SMaterial: Cobalt M42Overall Length: 5Type: Square..

Class: SquareList No. 4215SMaterial: Cobalt T15Overall Length: 5Type: Square..

Size -- 3/4Flute Length -- 4-3/4Flute Type -- StraightOverall Length -- 8"Point Styl..

Size -- 3/4Flute Length -- 1-1/2Flute Type -- StraightOverall Length -- 4"Point Styl..

Size -- 3/4Flute Length -- 1-1/2Flute Type -- StraightOverall Length -- 4"Point Styl..

Size -- 3/4Flute Length -- 5-7/8Flute Type -- StandardOverall Length -- 9-3/4Point S..

Class: Tool BitsList No. 4226FMaterial: Cobalt M42Overall Length: 6Type: Rectangular..

Square tool bits Ground finish Performance and economy Use for a wide variety of general pu..

Lightweight composite design minimizes operator fatigueErgonomic grip reduces vibrationTwin hammer i..

..

Box of 5,000 Fewer jams Engineered to fit other manufacturers tools More completed drives ..

3/4" chisel irwin part # sk-m444-3/4 ..

11/32" Steel Drill Stop  Held solidly in place with two set screws to give positive control ove..

21/64" Steel Drill Stop  Held solidly in place with two set screws to give positive control ove..

23/64" Steel Drill Stop  Held solidly in place with two set screws to give positive control ove..

8.1mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the ..

8.5mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the ..

8mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

9.5mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the ..

9mm Steel Drill Stop  Held solidly in place with two set screws to give positive control over the de..

Size O Steel Drill Stop  Held solidly in place with two set screws to give positive control over the..

Size P Steel Drill Stop  Held solidly in place with two set screws to give positive control over the..

Size Q Steel Drill Stop  Held solidly in place with two set screws to give positive control over the..

Size R Steel Drill Stop  Held solidly in place with two set screws to give positive control over the..

Size S Steel Drill Stop  Held solidly in place with two set screws to give positive control over ..

Size T Steel Drill Stop  Held solidly in place with two set screws to give positive control over the..

Size U Steel Drill Stop  Held solidly in place with two set screws to give positive control over the..

3/4” Carbide Tipped Masonry Drill Heavy-Duty masonry bit. The wide flutes improve dust removal wh..

Radius Edge Spiral Tool Spiral tool for applying top and bottom radii to material while sizing. S..

Solid Carbide Router Upcut..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Straight Wood & Plastic Bit General purpose, good for routing solid wood and hard plastic..

3 Flute Downcut Chipbreaker Finisher General purpose for solid wood and wood composites. Downcut ..

3 Flute Downcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood g..

3 Flute Downcut Low Helix Finisher For routing plastics and composites, as well as finish passes ..

3 Flute Downcut Low Helix Ripper Bit Serrated tooth design to eliminate tear out in difficult woo..

3 Flute Upcut Chipbreaker Finisher General purpose for solid wood and wood composites. Upcut spir..

3 Flute Upcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood gra..

3 Flute Upcut Low Helix Finisher For routing plastics and composites as well as finish passes on ..

3 Flute Upcut Low Helix Ripper Serrated tooth design to eliminate tear out in difficult wood grai..

2 Flute Compression Chipbreaker For routing laminated or veneered wood and wood composites when t..

2 Flute Compression For routing laminated or veneered wood and wood composites when top and botto..

4 Flute Combination Compression For routing laminated or veneered wood and wood composites when t..

4 Flute Compression For routing laminated or veneered wood and wood composites when top and botto..

Solid Carbide Router Upcut..

Carbide Countersink for Abrasive Material Manufactured from Ferro-Tic® machinable carbide and har..

High Speed Steel Countersink for Metal Heat-treated for long tool life. Designed to only sink ..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

K Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws ..

K Style Countersink from W.L. Fuller Used to countersink and counterbore for the heads of screws ..

1 Flute Compression Spiral For routing laminated or veneered wood and wood composites when top an..

Compression Spiral..

Mortise Compression Spiral..

3 Flute Upcut Lock Mortise Tool Designed for mortising side of doors to hold lock sets. Serrated ..

3 Flute Upcut Lock Mortise Tool Designed for mortising side of doors to hold lock sets. Serrated ..

Compression Spiral..

Compression Spiral Left Hand..

4 Flute Combination Compression For routing laminated or veneered wood and wood composites when t..

4 Flute Combination Compression For routing laminated or veneered wood and wood composites when t..

4 Flute Compression For routing laminated or veneered wood and wood composites when top and botto..

3 Flute Downcut Chipbreaker Finisher General purpose for solid wood and wood composites. Downcut ..

3 Flute Upcut Chipbreaker Finisher General purpose for solid wood and wood composites. Upcut spir..

2 Flute Downcut Chipbreaker Finisher General purpose for solid wood and wood composites. Downcut ..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Downcut Spiral Bit General purpose router for solid wood, wood composites and some plasti..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Upcut Spiral Bit General purpose router for solid wood, wood composites and some plastics..

2 Flute Upcut Chipbreaker Finisher General purpose for solid wood and wood composites. Upcut spir..

3 Flute Downcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood g..

3 Flute Downcut Low Helix Finisher For routing plastics and composites, as well as finish passes ..

3 Flute Downcut Low Helix Ripper Bit Serrated tooth design to eliminate tear out in difficult woo..

3 Flute Upcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood gra..

3 Flute Upcut High Helix Ripper Serrated tooth design to eliminate tear out in difficult wood gra..

3 Flute Upcut Low Helix Finisher For routing plastics and composites as well as finish passes on ..

3 Flute Upcut Low Helix Ripper Serrated tooth design to eliminate tear out in difficult wood grai..

4 Flute Combination Downcut For routing laminated or veneered wood and wood composites when top f..

4 Flute Combination Upcut For routing laminated or veneered wood and wood composites when bottom ..

Countersink for the heads of screws in woods, plastics, and non-ferrous materials. A high quality..

Compression Spiral..

2 Flute Upcut Ballnose Bit General purpose for solid wood and wood composites. Upcut spiral gives..

2 Flute Downcut Chipbreaker Finisher General purpose for solid wood and wood composites. Downcut ..