Diamond 4-1/2x1/16x7/8 Dt600fp Closed Rim With Special Geometry Klingspor 325368

DT 900 FP Special Diamond Cutting Blades For Angle Grinders – for hard floor tiles, porcelain, hard wall tiles, hard fine stoneware, ceramics

Diamond cutting disc DT 900 FP Special

The diamond cutting disc DT 900 FP Special is one of the professional tools that meet the highest demands in terms of performance and reliability, even under the toughest daily conditions. The closed edge with special geometry enables a high cutting speed. As a result, the disc produces perfect cut edges and at the same time has a very long service life. The extra thin pane is often used by tilers. In general, it is suitable for processing

• hard tiles (both for the wall and for the floor)
• hard porcelain stoneware
• Porcelain
• Ceramics

Further advantages of the diamond cutting disc DT 900 FP Special

The Klingspor company produces all diamond cutting discs in-house. This offers several advantages: On the one hand, this ensures optimal coordination between the disc core and the rim design. On the other hand, the production and the quality of the discs are continuously monitored. All Klingspor cutting discs meet the oSa guidelines and the European safety standard EN 13236. The user can therefore rely on consistent quality with optimal occupational safety.

What information is on the front of the diamond cutting disc?

A color code indicates which materials the diamond cutting disc is suitable for. A cutting disc for tiles is identified by the color green, for example. With the color coding, it is very easy for the user to quickly check the suitability of the cutting disc. As an aid to the correct clamping of the extra thin disc , an arrow is printed, which indicates the correct direction of rotation. In addition, the user can find information on the maximum permissible speed and the maximum working speed in the red color strip on the disc . Pictograms show the user which protective equipment must be worn when working with the lens. For diamond cutting discsit is necessary to use gloves, respiratory protection, hearing protection and safety glasses. Before starting work, the user must also let the cutting disc idle for approx. 30 seconds in order to check the correct clamping.