Article Search

Why Clean Cuts Matter (and how to tell when your tool is the problem)Clean cuts aren’t just about looks – they’re about efficiency, accuracy, and protecting your equipment.Whether you’re working with wood or metal, the quality of your cut affects everything that comes after it. Tear-out, burn marks, chatter, and rough finishes don’t just slow you down – they cost time, material, and patience.The tricky part? Many makers assume these issues are caused by machine setup or technique. While that can sometimes be true, the culprit is often much simpler: your cutting tool is worn, mismatch..

Purchasing a high-quality knife will yield you much better results and last a lot longer. The knives that are included in your stationary or portable power planes are good for getting started out of the box, but they won’t produce the best results and will ultimately fail the test of time. There are a few different types of knives you can find on the market for your power planer: TCT (Tungsten Carbide Tipped) or HM (Hard Metal) The TCT blades are tipped with a tungsten carbide insert to increase the longevity of the blade. The blades will last the longest when compared to steel blades..

  When it comes to high-precision woodworking operations—whether moulding, doors & windows, flooring, or panel processing—standard tools often fall short of the mark. That’s where custom cutters come into play. This article explores what custom cutters are, why a shop might invest in them, how the process works, and what to consider when specifying them.     1. What Are Custom Cutters? Custom cutters are cutting tools—such as router bits, shaper knives, and profiler heads—that are designed and manufactured to a specific profile or application rather than being “off-the-she..

Choosing the best carbide tipped saw blade It can be quite a daunting task, but once you break it down and understand what each difference makes, you can select a great blade for your specific cutting job. Determine the correct diameter of saw blade needed. This will usually be listed somewhere on your saw and could be indicated in SAE (inches) or Metric (millimeters). So a 10” saw may be listed as 250mm and these are in most cases interchangeable. The outside diameter of a saw does not in most cases need to match exactly but should not be over the specified diameter for th..