Fein 63811002010 Wheel guard cover.
Wheel guard cover for cutting work. Developed and proven in ..
$21.80USD
3-Jaw drill chuck
This part is compatible with the following machines:
KBM32Q (72702709368) Me..
$68.80USD
Solid metal drill chuck
Made by Röhm, with carbide jaws and high clamping force. Screwdriver bit ..
$58.87USD
Small solid metal drill chuck
Made by Röhm , maximum torque 60 Nm.
Compatible with all FEIN cord..
$44.41USD
Socket adapter
To hold sockets with 1/2 in square holder.
Compatible with all FEIN cordless dril..
$43.78USD
Twist drill
6 42 98 050 02 0
..
$33.09USD
Open End Wrench
Fits:
BOP 10 (BOP 10), BOP 10-2 (BOP 10-2), BOP 13-2 (BOP 13-2)
6 29 03 002 0..
$8.08USD
Work Arbor
For satinizing tools (drum and roller), 5/8 in-11 tool size 19 mm dia.
Fits:
WP..
$62.66USD
3" Ventilated Backing Pad
Features:
Ventilated backing pad, ideal for Pyramix grinding ..
$15.94USD
3-Jaw Drill Chuck
Drill chuck holder B 16
Fits:
ASzx 648-1 (ASzx 648-1), KBH 25-2 U (KBH 2..
$62.39USD
3-Jaw Drill Chuck
Drill chuck holder B 16
Fits:
ASzx 648-1 (ASzx 648-1)
6 32 02 037 01 ..
$87.22USD
3-Jaw Drill Chuck
Drill chuck holder 1/2 in -20 UNF
Fits:
DSceu 638 (DSceu 638)
6 32 03..
$44.86USD
3-Jaw Drill Chuck
Drill chuck holder B 10
Fits:
ASzxeu 636-1 (ASzxeu 636-1), AWBP 10 Selec..
$46.76USD
3-Jaw Drill Chuck
Drill chuck holder B 12
6 32 02 028 01 9
..
$49.69USD
3-Jaw Drill Chuck
Drill chuck holder 1/2 in -20 UNF
Fits:
DSceu 638 (DSceu 638)
6 32 03..
$57.52USD
Jaw chuck
For tapping drill direct adaptor clamping range 1/8 - 3/8 in, with wrench
Fits:
..
$137.36USD
Twist Drill Bit
Drill Bit Grouping – Drill Bit
Item – Twist Drill Bit
Drill Bit Material –..
$33.09USD
Work arbor
For satinizing tools (drum and roller), 5/8 in-11 tool size 19 mm dia.
Fits:
WP..
$72.74USD
4-1/2" Ventilated Backing Pad
Features:
Ventilated backing pad, ideal for Pyramix grinding ..
$16.25USD
Elastic backing pad without clamping unit
6 38 06 138 01 5
..
$20.12USD
Twist Drill Bit
Drill Bit Grouping – Drill Bit
Item – Twist Drill Bit
Drill Bit Material –..
$33.09USD
Allen Key
Fein Wrench SW5 Replacement Part
6 29 07 011 00 9
..
$2.40USD
Safety Guard for Cutting Work
Diameter 7 In
Fits:
WSG 20-180 (WSG 20-180)
6 38 11 004 01..
$43.47USD
Twist Drill
Overall Length: 3-3/4"
Drill Bit Point Angle: 135 Degrees
Drill Bit Finish: Un..
$35.31USD
Combination nozzle
For wet and dry work with interchangeable rubber blades and brush strips
..
$47.82USD
Adapter with 3/4 in Weldon shank
For converting competitorsʼ products to the QuickIN system.
..
$70.70USD
Adapter with 3/4 in Weldon shank
B 16 drive
Fits:
JCM 200 QX (JCM 200 QX), JCM 200 U (JCM ..
$28.29USD
Adapter plate for magnetic core drills
Fits:
IBS 16 (IBS 16)
3 24 22 326 01 0
..
$59.87USD
Adapter QuickIN Plus to B16
Fits:
KBH 25-2 U (KBH 25-2 U)
6 39 01 047 00 0
..
$28.29USD
Adaptor Set for FMM blades to FSN 400E /MOTLX 6-25
..
$17.68USD
Wrench size 4
6 29 07 010 00 0
..
$2.40USD
Allen Wrench
This allen key is a genuine OEM sourced item designed for use with Fein power tools...
$2.93USD
Aluminum combination tool
For wet and dry work with interchangeable rubber blades and brush strip..
$132.51USD
Angled head with output
434 in/lbs [60 Nm]
Tool mount 1/2 in Outer square
Fits:
ASW 1..
$704.87USD
Vacuum Hose
Electrostatically conductive, orange-black.
Fits:
Turbo II X AC Hepa (Turbo II..
$194.53USD
Vacuum Hose
Electrostatically conductive, orange-black.
Fits:
Turbo II X AC Hepa (Turbo II..
$220.28USD
Anti-Vibration Handle
M 8, vibration-absorbing, to reduce the vibrations during longer jobs.
..
$15.27USD
Elastic Backing Pad
With clamping unit
180 mm
Suitable for:
WSB 20-180 (WSB 20-180), WSB..
$66.93USD
1 to 3 kg Balancer
Features:
Adjustable load 1-3 kg
Pre-set by manuf. 2 kg
Rope extensi..
$291.75USD
0.5 to 1.5 kg Balancer
Features:
Adjustable load 1.5-2.5 kg
Pre-set by manuf. 2 kg
Rope..
$135.59USD
10 to 14 kg Balancer
Features:
Adjustable load 10-14 kg
Pre-set by manuf. 12 kg
Rope ex..
$388.96USD
1 to 3 kg Balancer
Constant traction
Tear-resistant steel cord
Wire rope execution
9 ..
$427.32USD
2.5 to 5 kg Balancer
Features:
Adjustable load 2.5-5 kg
Pre-set by manuf. 3.5 kg
Rope e..
$311.36USD
3.5 to 6.5 kg Balancer
Features:
Adjustable load 3.5-6.5 kg
Pre-set by manuf. 5 kg
Rope..
$330.05USD
4.5 to 9 kg Balancer
Features:
Adjustable load 4.5-9 kg
Pre-set by manuf. 7 kg
Rope ext..
$360.00USD
7.5 to 11 kg Balancer
Features:
Adjustable load 7.5-11 kg
Pre-set by manuf. 9 kg
Rope e..
$378.68USD
HighPower battery pack
HighPower Li-ion battery with high-current cells, charge indicator and FEI..
$157.74USD
Rechargeable battery
Li-ion with capacity indicator
Fits:
ASM 14-2 PC (without battery) (A..
$113.15USD
Bit holder
Fits:
ASCM 14 QX (ASCM 14 QX), ASCM 18 QX (ASCM 18 QX), ASCM 14 QXC (ASCM 14 QXC), AS..
$37.52USD
Cutter Blade
For stainless steel up to 112,000 lbf/in² [800 N/mm²]
For stainless steel u..
$114.27USD
Cutter Blade
For steel up to 56,000 lbf/in²
For sheet steel up to 400 N/mm2
2.0 mm she..
$132.21USD
Cutter Blade
For stainless steel up to 112,000 lbf/in²
For stainless steel up to 800 N/m..
$207.66USD
Fein Bolt Replacement Part
3 02 16 130 00 4
..
$2.43USD
Flush-Mount Wall Plug
Above 50 V, 16 A, 100 - 300 Hz, 10 h, 3 Ph + ground|3 07 28 141 00 8
..
$76.21USD
Rapid Charger
For all FEIN Li-ion batteries. Charging time 35 min. or more.
Fits:
AFSC 18 ..
$53.77USD
Chip Bag
Fits:
BLK 5.0 (BLK 5.0)
3 13 09 114 00 8
..
$125.73USD
Chip Guard
Prevents contact with hot and sharp-edged chips.
Fits:
KBH 25-2 U (KBH 25-2 U)
..
$23.58USD
Touch Guard
3 18 10 247 01 9
..
$28.15USD
1/2" chuck and adapter for JHM 2x2
Features:
Convert Slugger drilling machines into portabl..
$141.49USD
1/2" chuck and adapter for JHM Holemaker II
Features:
Convert Slugger drilling machines int..
$131.18USD
1/2″ chuck and adapter for JHM USA 101
Features:
Converts KBB38 Mag Drill into a portable d..
$131.18USD
3-Jaw Chuck with QuickIN shank
Fits:
JCM 200 QX (JCM 200 QX), JCM 200 U (JCM 200 U), JCM 256 U (..
$111.50USD
3/4" chuck and adapter for JHM USA5 & JM500 Mag Drill
Features:
Convert Slugger drilling ma..
$235.78USD
Fein Drill Chuck
Chuck with spindle-stop, Allows to open and close the chuck with only one hand.
..
$63.19USD
Clamp and Feed Device
(W x D x H) 11 x 11 x 15-1/2 in, Designed for pipe diameter from 3 up to 15..
$2,725.46USD
Clamping unit
For elastic backing pad and for twisted steel wire brush.
Suitable for Fein WSB 10..
$48.51USD
Clamping unit
For flexible grinding/cutting wheels, circular twisted steel wire brushes and bevel..
$40.20USD
Clamping Unit
For elastic backing pads
Suitable for:
WSB 20-180 (WSB 20-180), WSB 20-230 (..
$52.64USD
Pipe Clamp
Pipe Clamp is designed for T- and I-Beam stock with profiles up to 21-5/8 in high and ..
$576.89USD
Cable holder
For attaching cable to suction hose, fits suction hose 1-1/16 - 1-3/8 in [27-35 mm] ..
$11.73USD
1/4" x 1-3/16" Depth Collet
Features:
Exceptionally accurate tool mount for extraordina..
$26.57USD
Collets
With wrap-around collar for workpiece protection and to prevent the wrench slipping when ..
$24.81USD
Collets Inox
Stainless steel version, with wrap-around collar for workpiece protection and to pre..
$28.77USD
Collets Inox
Stainless steel version, with wrap-around collar for workpiece protection and to pre..
$33.89USD
Collets
With wrap-around collar for workpiece protection and to prevent the wrench slipping when ..
$29.01USD
Collets Depth 1-3/16 in
6 32 07 059 00 6
..
$26.57USD
Collets Depth 1-3/16 in
6 32 07 069 00 5
..
$26.57USD
Collets
For collets and floating collet chucks
Fits:
ASCM 18 QM Select (ASCM 18 QM), ABS 1..
$31.41USD
Collets
For collets and floating collet chucks
Fits:
ABS 18 Q Select (ABS 18 Q), ASCM 18 Q..
$31.41USD
Collets
For collets and floating collet chucks
Fits:
ABS 18 Q Select (ABS 18 Q), ASCM 18 Q..
$31.41USD
Collets
For collets and floating collet chucks
Fits:
ABS 18 Q Select (ABS 18 Q), ASCM 18 Q..
$31.41USD
Collets
For collets and floating collet chucks
Fits:
KBH 25-2 U (KBH 25-2 U), ABS 18 Q Sel..
$31.41USD
Collets
For collets and floating collet chucks
Fits:
ABS 18 Q Select (ABS 18 Q), ASCM 18 Q..
$31.41USD
Collets
For collets and floating collet chucks
Fits:
ABS 18 Q Select (ABS 18 Q), ASCM 18 Q..
$34.11USD
Polishing paste, white
For polishing and mirror finishing.
Fits:
RS 12-70 E – Professional..
$37.75USD
Step adapter
For varied connection diameters, for example, for connection of other brands.
3 1..
$13.55USD
Touch Guard
Prevents unwanted contact with rotating parts and increases safety.
Fits:
JMU ..
$154.68USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$179.55USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$179.55USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$179.55USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$179.55USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$179.55USD
Contact Roller
Long service life, low rolling resistance due to high- quality ball bearings, easi..
$110.85USD
