Straight cutting blade Z-bend, 2-pack
6 39 03 216 01 7
..
$198.97USD $179.07USD
For groove cutting in rigid foam panels for 1/2 in and 3/4 in hot water tubes as well as conduits fo..
$89.10USD $80.20USD
For groove cutting in rigid foam panels for electrical conduit, wall and in-floor heating.
Wid..
$98.95USD $89.06USD
The cost is lower and the service life shorter, compared with the diamond version.
For corners, r..
$103.45USD $93.11USD
The cost is lower and the service life shorter, compared with the diamond version.
For corners, r..
$411.89USD $370.70USD
The cost is lower and the service life shorter, compared with the diamond version.
For corners, r..
$122.36USD $110.12USD
The cost is lower and the service life shorter, compared with the diamond version.
For corners, r..
$468.16USD $421.34USD
Short version. For removal of stubborn paint, adhesive residue, carpet, tile adhesive, and underseal..
$41.50USD $37.35USD
For removal of floor coverings and coatings, such as waterproofing, adhesive residue, etc.
Fit..
$61.71USD $55.54USD
Hooked blades for cutting out planked deck caulk materials rapidly and safely. Ideal for problem loc..
$88.31USD $79.48USD
Long version. For removal of stubborn paint, adhesive residue, carpet, tile adhesive, and underseal...
$34.05USD $30.64USD
For universal cutting work in leather, plastic films, roofing felt, cork, etc.
Dia. 4 In
Mo..
$129.81USD $116.83USD
Universal blade for almost all expansion joints.
Straight type. Width 1-3/16 in [30 mm], cutting ..
$59.58USD $53.63USD
For cleaning joint walls before installation of new sealant.
Straight type. Width 1-1/4 in [31 mm..
$204.29USD $183.86USD
For cleaning joint walls before installation of new sealant.
Straight type. Width 1-1/4 in [31 mm..
$918.23USD $826.41USD
Straight, very long shape for deep joints.
Qty 1
Mount SLM
Fits:
FEIN Professional-..
$59.58USD $53.63USD
For removal of very narrow marble, epoxy resin and pozzolan grouts. Not suitable for very hard epoxy..
$190.46USD $171.41USD
For removal of very narrow marble, epoxy resin and pozzolan grouts. Not suitable for very hard epoxy..
$105.34USD $94.80USD
For removal of very narrow marble, epoxy resin and pozzolan grouts. Not suitable for very hard epoxy..
$471.35USD $424.22USD
For the removal of marble, epoxy resin and pozzolan grouts. Not suitable for very hard epoxy or ceme..
$105.34USD $94.80USD
For the removal of marble, epoxy resin and pozzolan grouts. Not suitable for very hard epoxy or ceme..
$471.35USD $424.22USD
For the removal of marble, epoxy resin and pozzolan grouts. Outstanding tool life. Also suitable for..
$194.71USD $175.24USD
For the removal of marble, epoxy resin and pozzolan grouts. Outstanding tool life. Also suitable for..
$874.61USD $787.15USD
For the removal of marble, epoxy resin and pozzolan grouts. Outstanding tool life. Also suitable for..
$194.71USD $175.24USD
For the removal of marble, epoxy resin and pozzolan grouts. Outstanding tool life. Also suitable for..
$874.61USD $787.15USD
For removal of insulating glass panes set in glazing compound.
Qty 2
Mount SLM
Fits:..
$176.62USD $158.96USD
Mushroom-shaped cutting blade, for cutting silicone and soft glazing compound as well as separation ..
$74.48USD $67.03USD
For cutting carpet, PVC flooring, cardboard, bitumen shingles and roofing paper. With three cutting ..
$57.46USD $51.71USD
For cutting carpet, PVC flooring, cardboard, bitumen shingles and roofing paper. With three cutting ..
$254.30USD $228.87USD
70mm Outside Dia, Spacer for 707NM Cutter, 1 1/4" Inside Dia, 10mm Thickness
Spacer for 707NM..
$24.20USD $21.78USD
Repair Kit
The repair kit includes a ball bearing, screw, washer as well as a spring washer.
..
$8.34USD $7.51USD
6mm Dia, Slow Spiral Helix Drill, 75mm Length
Dimar's Slow Spiral Drills also known as "Lew Helix..
$8.77USD $7.90USD
1/2" Dia, Carbide Inserts, Core Box Bit, 1 Flutes, 1/4" Shank, 2 5/16" Length
Dimar's Carbi..
$34.90USD $31.41USD
Safety Guard for Cutting Work
Diameter 7 In
Fits:
WSG 20-180 (WSG 20-180)
6 38 11 004 01..
$81.93USD $73.74USD
Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 12"Point S..
$48.32USD $43.49USD
Twist Drill
Overall Length: 3-3/4"
Drill Bit Point Angle: 135 Degrees
Drill Bit Finish: Un..
$67.03USD $60.33USD
#13 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#14 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#15 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#16 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#17 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#18 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#19 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#20 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#21 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#22 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#23 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#24 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#25 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#26 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#27 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#28 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#29 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
#30 Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
11/64" Steel Drill Stop
Held solidly in place with two set screws to give positive control ove..
$6.19USD $5.26USD
3/16" Steel Drill Stop
Held solidly in place with two set screws to give positive control over..
$6.19USD $5.26USD
4mm Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$6.19USD $5.26USD
5/32" Steel Drill Stop
Held solidly in place with two set screws to give positive control over..
$6.19USD $5.26USD
9/64" Steel Drill Stop
Held solidly in place with two set screws to give positive control over..
$6.19USD $5.26USD
7/16” Carbide Tipped Masonry Drill
Heavy-Duty masonry bit. The wide flutes improve dust removal w..
$13.44USD $11.43USD
Single Flute Upcut Spiral Hard Plastic & Aluminum
Single flute Upcut tool good for routing hard p..
$86.11USD $77.50USD
2 Flute Downcut Hard Plastic & Aluminum Bit
Good for routing hard plastics and aluminum. End mill..
$83.48USD $75.13USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$83.48USD $75.13USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$83.48USD $75.13USD
2 Flute Straight Wood & Plastic Bit
General purpose, good for routing solid wood and hard plastic..
$79.18USD $71.26USD
Upcut Bit for Aluminum & Hard Plastics
Excellent for routing in hard plastics and aluminum.
..
$83.48USD $75.13USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$30.80USD $26.19USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$48.39USD $41.13USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$71.38USD $60.68USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$56.98USD $48.44USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$88.56USD $75.28USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$48.39USD $41.13USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$71.38USD $60.68USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$56.98USD $48.44USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$79.69USD $67.75USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$48.39USD $41.13USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$56.98USD $48.44USD
Size -- 7/16Flute Length -- 4-1/16Flute Type -- StandardOverall Length -- 5-1/2Point..
$16.92USD $15.23USD
WL Fuller Carbide Tipped Plug Cutter
Designed for clean cutting and hardened for long life. These..
$277.87USD $236.19USD
WL Fuller Stainless Steel Plug Cutter
Designed for clean cutting and hardened for long life. Thes..
$41.82USD $35.55USD
WL Fuller Standard Plug Cutter
Designed for clean cutting and hardened for long life.
These..
$30.75USD $26.14USD
WL Fuller Standard Plug Cutter
Designed for clean cutting and hardened for long life.
These..
$30.75USD $26.14USD
WL Fuller Quick-Change Plug Cutter
Designed for clean cutting and hardened for long life. These t..
$32.39USD $27.53USD
Quality Import Carbide Tipped Tool Bit - AR7 7/16 × 7/16″ Shank - 3″ Overall Length - Grade C2
..
$4.94USD $4.20USD
Flute Type: Spiral
For Use With:
Material: High Speed Steel
Overall Length: 3-3/4
Pitch ..
$112.77USD $101.50USD
Flute Type ? For Use With ? Material ? Solid CarbideOverall Length ? 3Pitch Diameter..
$426.85USD $384.16USD
Flute Type: Spiral
For Use With:
Material: High Speed Steel
Overall Length: 3-3/4
Pitch ..
$112.77USD $101.50USD
Flute Type ? For Use With ? Material ? Solid CarbideOverall Length ? 3Pitch Diameter..
$426.85USD $384.16USD
Flute Type: StraightFor Use With: Material: High Speed SteelOverall Length: 3-5/32Pitch Diameter Lim..
$23.70USD $21.33USD
Flute Type: StraightFor Use With: Material: High Speed SteelOverall Length: 3-5/32Pitch Diameter Lim..
$20.64USD $18.58USD
Flute Type: StraightFor Use With: Material: High Speed SteelOverall Length: 3-5/32Pitch Diameter Lim..
$64.10USD $57.69USD
Flute Type: StraightFor Use With: Material: High Speed SteelOverall Length: 3-5/32Pitch Diameter Lim..
$82.35USD $74.12USD
Flute Type: StraightFor Use With: Material: High Speed SteelOverall Length: 3-5/32Pitch Diameter Lim..
$64.10USD $57.69USD
