5/32” Extra Long “Fast Spiral” Taper Point Drill
Cuts faster and clears chips better than the gen..
$34.28USD $29.14USD
5/32” Extra Length Taper Drill Bit
Used to cut wood and plastics in one operation for the thread ..
$29.97USD $25.48USD
5/32” x 8” Long Taper Drill Bit
The longest available taper drills for cutting wood and plastics...
$50.28USD $42.74USD
TPS-Lock Hex Shank Taper Drill
These are the best professional High Speed Steel Taper Point Drill..
$14.93USD $12.70USD
Procut jobber drill 5/32
..
$1.26USD $1.08USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$28.09USD $25.28USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$28.09USD $25.28USD
Single Flute Upcut “O” Style Aluminum
Designed for routing aluminum sheet and solid material on C..
$48.58USD $43.72USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$22.33USD $20.09USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$30.52USD $27.47USD
2 Flute Straight Wood & Plastic Bit
General purpose, good for routing solid wood and hard plastic..
$22.16USD $19.94USD
Single Flute Downcut “O” Style Hard Plastic
Designed for routing hard plastics. Downcut design to..
$27.63USD $24.87USD
Single Flute “O” Style General Plastics
Generic router bit for both hard and soft plastics. Free ..
$30.98USD $27.88USD
Single Flute Upcut Spiral Hard Plastic & Aluminum
Single flute Upcut tool good for routing hard p..
$30.26USD $27.24USD
Single Flute Upcut “O” Style Soft Plastic
Designed for routing soft plastics. Upcut design gives ..
$27.63USD $24.87USD
2 Flute Downcut Hard Plastic & Aluminum Bit
Good for routing hard plastics and aluminum. End mill..
$26.58USD $23.92USD
Upcut Bit for Aluminum & Hard Plastics
Excellent for routing in hard plastics and aluminum.
..
$26.58USD $23.92USD
4 Flute Downcut Spiral Bit
Downcut spiral for hard plastics. 4 wings for smoother finish than con..
$31.36USD $28.22USD
Size -- 5/32
Flute Length -- 2"
Flute Type -- Standard
Overall Length -- 3-1/8
Point Sty..
$4.06USD $3.66USD
5/32" Dia, Slow Spiral Helix Drill, 75mm Length
Dimar's Slow Spiral Drills also known as "Lew Hel..
$5.62USD $5.06USD
5/64” Stubby Length Taper Drill Bit
Used to cut wood and plastics in one operation for the thread..
$7.14USD $6.07USD
5/64” Standard Length “Fast Spiral” Taper Point Drill
Cuts faster and clears chips better than th..
$13.44USD $11.43USD
5/64” Standard Length Taper Drill Bit
Used to cut wood and plastics in one operation for the thre..
$10.22USD $8.69USD
5/64” Extra Length Taper Drill Bit
Used to cut wood and plastics in one operation for the thread ..
$19.08USD $16.23USD
Procut jobber drill 5/64
..
$1.19USD $1.01USD
Size -- 5/64Flute Length -- 1"Flute Type -- StandardOverall Length -- 2"Point Style ..
$2.78USD $2.51USD
Fein Carbide Tipped Annular Cutter
Suitable for most materials and applications offering impro..
$94.06USD $84.65USD
Fein Carbide Tipped Annular Cutter
Suitable for most materials and applications offering impro..
$121.27USD $109.14USD
17/64" Steel Drill Stop
Held solidly in place with two set screws to give positive control ove..
$8.88USD $7.55USD
19/64" Steel Drill Stop
Held solidly in place with two set screws to give positive control ove..
$8.88USD $7.55USD
5/16" Steel Drill Stop
Held solidly in place with two set screws to give positive control over..
$8.88USD $7.55USD
7.75mm Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
7mm Steel Drill Stop
Held solidly in place with two set screws to give positive control over the de..
$8.88USD $7.55USD
9/32" Steel Drill Stop
Held solidly in place with two set screws to give positive control over..
$8.88USD $7.55USD
Size F Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size G Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size H Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size I Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size J Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size K Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size L Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size M Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
Size N Steel Drill Stop
Held solidly in place with two set screws to give positive control over the..
$8.88USD $7.55USD
5/8” Carbide Tipped Masonry Drill
Heavy-Duty masonry bit. The wide flutes improve dust removal wh..
$23.01USD $19.56USD
Solid Carbide Router Upcut..
$177.90USD $160.11USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$199.97USD $179.98USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$166.12USD $149.51USD
3 Flute Downcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Downcut ..
$227.89USD $205.10USD
3 Flute Downcut High Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood g..
$212.15USD $190.93USD
3 Flute Downcut Low Helix Ripper Bit
Serrated tooth design to eliminate tear out in difficult woo..
$240.40USD $216.36USD
3 Flute Upcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Upcut spir..
$227.89USD $205.10USD
3 Flute Upcut High Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood gra..
$205.82USD $185.24USD
3 Flute Upcut Low Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood grai..
$205.82USD $185.24USD
Compression Spiral..
$214.11USD $192.70USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$143.79USD $122.22USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$46.50USD $39.54USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
Four Flute Countersink for Deep Holes in Wood, Plastic & Non-Ferrous Metal
Made of Carbon Steel a..
$22.34USD $18.99USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$53.89USD $45.81USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$76.60USD $65.12USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
3 Flute Upcut Lock Mortise Tool
Designed for mortising side of doors to hold lock sets. Serrated ..
$516.98USD $465.29USD
3 Flute Upcut Lock Mortise Tool
Designed for mortising side of doors to hold lock sets. Serrated ..
$536.97USD $483.28USD
4 Flute Combination Compression
For routing laminated or veneered wood and wood composites when t..
$279.73USD $251.75USD
2 Flute Upcut Ballnose Bit
General purpose for solid wood and wood composites. Upcut spiral gives..
$271.00USD $243.90USD
3 Flute Upcut High Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood gra..
$216.57USD $194.91USD
1 Flute Compression Spiral
For routing laminated or veneered wood and wood composites when top an..
$309.41USD $278.47USD
2 Flute Compression Chipbreaker
For routing laminated or veneered wood and wood composites when t..
$294.36USD $264.93USD
Compression Spiral..
$237.90USD $214.11USD
4 Flute Combination Compression
For routing laminated or veneered wood and wood composites when t..
$257.82USD $232.04USD
4 Flute Compression
For routing laminated or veneered wood and wood composites when top and botto..
$345.31USD $310.78USD
Downcut Chipbreaker Finisher..
$246.76USD $222.08USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$184.59USD $166.13USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$221.54USD $199.39USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$171.26USD $154.14USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$177.57USD $159.81USD
2 Flute Straight Wood & Plastic Bit
General purpose, good for routing solid wood and hard plastic..
$197.63USD $177.87USD
2 Flute Upcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Upcut spir..
$246.76USD $222.08USD
3 Flute Downcut High Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood g..
$216.57USD $194.91USD
3 Flute Downcut Low Helix Ripper Bit
Serrated tooth design to eliminate tear out in difficult woo..
$258.08USD $232.27USD
3 Flute Upcut Low Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood grai..
$220.75USD $198.67USD
4 Flute Combination Downcut
For routing laminated or veneered wood and wood composites when top f..
$269.83USD $242.85USD
4 Flute Combination Upcut
For routing laminated or veneered wood and wood composites when bottom ..
$323.79USD $291.41USD
Solid O-Flute Router
..
$190.32USD $171.29USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$143.79USD $122.22USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$46.50USD $39.54USD
Four Flute Countersink for Deep Holes in Wood, Plastic & Non-Ferrous Metal
Made of Carbon Steel a..
$22.34USD $18.99USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$143.79USD $122.22USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$46.50USD $39.54USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
Four Flute Countersink for Deep Holes in Wood, Plastic & Non-Ferrous Metal
Made of Carbon Steel a..
$22.34USD $18.99USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$53.89USD $45.81USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$76.60USD $65.12USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$63.44USD $53.92USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$22.34USD $18.99USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$143.79USD $122.22USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$46.50USD $39.54USD
