3/8” Extra Long “Fast Spiral” Taper Point Drill
Cuts faster and clears chips better than the gene..
$56.72USD $48.21USD
3/8” Extra Length Taper Drill Bit
Used to cut wood and plastics in one operation for the thread a..
$53.75USD $45.70USD
3/8” x 8” Long Taper Drill Bit
The longest available taper drills for cutting wood and plastics.
..
$69.08USD $58.72USD
Procut jobber drill 3/8
..
$4.99USD $4.24USD
2 Flute “O” Style Downcut Slow Spiral Bit
Excellent for routing both soft and hard plastics.
..
$51.04USD $45.93USD
Downcut Spiral Ultimax..
$55.60USD $50.04USD
2 Flute “O” Style Straight Cut Bit
Double wing O Flute designed for routing soft plastics
..
$63.67USD $57.30USD
2 Flute “O” Flute Upcut Slow Spiral
Excellent for routing both soft and hard plastics.
..
$42.56USD $38.30USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$35.87USD $32.28USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$35.87USD $32.28USD
Upcut Spiral Ultimax..
$64.96USD $58.47USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$80.39USD $72.35USD
Solid Carbide Router Upcut..
$80.13USD $72.12USD
2 Flute Straight Wood & Plastic Bit
General purpose, good for routing solid wood and hard plastic..
$79.18USD $71.26USD
Downcut Spiral Ultimax..
$60.83USD $54.75USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$40.01USD $36.01USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$40.77USD $36.69USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$40.01USD $36.01USD
2 Flute Upcut Ballnose Bit
General purpose for solid wood and wood composites. Upcut spiral gives..
$62.84USD $56.55USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$52.59USD $47.33USD
2 Flute Straight Wood & Plastic Bit
General purpose, good for routing solid wood and hard plastic..
$79.18USD $71.26USD
2 Flute Upcut High Impact Bit
General purpose router for solid wood, wood composites and some pla..
$60.78USD $54.70USD
Upcut Spiral Ultimax..
$62.50USD $56.26USD
3 Flute Upcut Spiral Mill End Bit
Good for routing hard plastics and finish passes on solid woods..
$54.84USD $49.35USD
Composite Router Tool
Unique flute geometry specifically designed for routing reinforced plastic ..
$97.52USD $87.77USD
Composite Router Tool
Unique flute geometry specifically designed for routing reinforced plastic ..
$123.06USD $110.75USD
1 Flute Compression Spiral
For routing laminated or veneered wood and wood composites when top an..
$103.50USD $93.15USD
Downcut Spiral Single Flute..
$50.08USD $45.08USD
Single Flute Downcut “O” Style Hard Plastic
Designed for routing hard plastics. Downcut design to..
$37.09USD $33.38USD
Single Flute Downcut “O” Style Soft Plastic
Designed for routing soft plastics. Downcut design to..
$40.01USD $36.01USD
Single Flute Upcut “O” Style Aluminum
Designed for routing aluminum sheet and solid material on C..
$81.09USD $72.98USD
Single Flute Upcut “O” Style Hard Plastic
Designed for routing hard plastics. Upcut design gives ..
$37.09USD $33.38USD
Single Flute Upcut “O” Style Soft Plastic
Designed for routing soft plastics. Upcut design gives ..
$37.09USD $33.38USD
Single Flute Upcut Soft Plastics
Designed for routing soft plastic.
..
$50.08USD $45.08USD
V-Flute Straight Cut..
$56.44USD $50.79USD
2 Flute Compression Chipbreaker
For routing laminated or veneered wood and wood composites when t..
$105.38USD $94.84USD
2 Flute Downcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Downcut ..
$77.72USD $69.94USD
2 Flute Mortise Compression
For routing laminated or veneered wood and wood composites when top a..
$69.81USD $62.83USD
2 Flute Mortise Compression
For routing laminated or veneered wood and wood composites when top a..
$106.67USD $96.00USD
2 Flute Ultimax Mortise Compression
For routing laminated or veneered wood and wood composites wh..
$113.12USD $101.81USD
2 Flute Downcut Spiral Bit
General purpose router for solid wood, wood composites and some plasti..
$38.46USD $34.61USD
2 Flute Upcut Spiral Bit
General purpose router for solid wood, wood composites and some plastics..
$42.13USD $37.92USD
2 Flute Upcut Ballnose Bit
General purpose for solid wood and wood composites. Upcut spiral gives..
$48.08USD $43.27USD
Solid Carbide Router Upcut..
$56.22USD $50.60USD
2 Flute Straight Wood & Plastic Bit
General purpose, good for routing solid wood and hard plastic..
$42.61USD $38.34USD
2 Flute Upcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Upcut spir..
$77.72USD $69.94USD
2 Flute Upcut High Impact Bit
General purpose router for solid wood, wood composites and some pla..
$56.98USD $51.28USD
3 Flute Mortise Compression
For routing laminated or veneered wood and wood composites when top a..
$90.67USD $81.60USD
3 Flute Ultimax Compression
For routing laminated or veneered wood and wood composites when top a..
$135.52USD $121.97USD
3 Flute Downcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Downcut ..
$107.81USD $97.03USD
Downcut Chipbreaker Finisher
..
$118.09USD $106.28USD
3 Flute Downcut High Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood g..
$81.30USD $73.17USD
3 Flute Downcut Low Helix Finisher
For routing plastics and composites, as well as finish passes ..
$65.54USD $58.99USD
3 Flute Downcut Low Helix Ripper Bit
Serrated tooth design to eliminate tear out in difficult woo..
$127.95USD $115.16USD
3 Flute Downcut Low Helix Ripper Bit
Serrated tooth design to eliminate tear out in difficult woo..
$88.25USD $79.43USD
3 Flute Upcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Upcut spir..
$104.67USD $94.20USD
2 Flute Upcut Chipbreaker Finisher
General purpose for solid wood and wood composites. Upcut spir..
$118.09USD $106.28USD
3 Flute Upcut High Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood gra..
$81.30USD $73.17USD
3 Flute Upcut Low Helix Finisher
For routing plastics and composites as well as finish passes on ..
$65.38USD $58.84USD
3 Flute Upcut Low Helix Ripper
Serrated tooth design to eliminate tear out in difficult wood grai..
$88.25USD $79.43USD
4 Flute Upcut Fiberglass Router Bit
4 wing upcut router good for routing fiberglass
..
$139.41USD $125.48USD
Compression Spiral
..
$72.23USD $65.01USD
Solid O-Flute Router
..
$53.34USD $48.00USD
O-Flute Straight Cut Plastics..
$84.27USD $75.84USD
2 Flute Straight General Purpose Bit
Suitable for routing solid wood, MDF and some plastics
..
$100.96USD $90.87USD
Upcut Lock Mortise Tool..
$330.86USD $297.78USD
2 Flute Beading Tools
For beading profiles in MDF, solid wood and plastics. 10º flares provide li..
$126.90USD $114.21USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$90.31USD $76.77USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$30.80USD $26.19USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$15.07USD $12.81USD
Four Flute Countersink with 1/4” Shank for Smaller Drills
The type “J” countersink has a 1/4” sha..
$16.41USD $13.95USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$42.22USD $35.89USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$65.18USD $55.40USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$51.06USD $43.41USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$74.05USD $62.95USD
2 Flute Beading Tools
For beading profiles in MDF, solid wood and plastics. 10º flares provide li..
$126.90USD $114.21USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$90.31USD $76.77USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$30.80USD $26.19USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$15.07USD $12.81USD
Four Flute Countersink with 1/4” Shank for Smaller Drills
The type “J” countersink has a 1/4” sha..
$16.41USD $13.95USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$42.22USD $35.89USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$65.18USD $55.40USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$51.06USD $43.41USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$74.05USD $62.95USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$30.80USD $26.19USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$15.07USD $12.81USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$42.22USD $35.89USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$65.18USD $55.40USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$51.06USD $43.41USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$74.05USD $62.95USD
Carbide Countersink for Abrasive Material
Manufactured from Ferro-Tic® machinable carbide and har..
$90.31USD $76.77USD
High Speed Steel Countersink for Metal
Heat-treated for long tool life.
Designed to only sink ..
$30.80USD $26.19USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$15.07USD $12.81USD
Four Flute Countersink with 1/4” Shank for Smaller Drills
The type “J” countersink has a 1/4” sha..
$16.41USD $13.95USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$42.22USD $35.89USD
K Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws ..
$65.18USD $55.40USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$51.06USD $43.41USD
KS Style Countersink from W.L. Fuller
Used to countersink and counterbore for the heads of screws..
$74.05USD $62.95USD
Countersink for the heads of screws in woods, plastics, and non-ferrous materials.
A high quality..
$16.72USD $14.21USD
Four Flute Countersink with 1/4” Shank for Smaller Drills
The type “J” countersink has a 1/4” sha..
$16.41USD $13.95USD
